Eclipse Combustion F8000 Series Service/ Instrukcje Operacyjne Pobierz pdf (Strona 27)

2-13

D. VERIFY INSTALLATION

• Be certain there is no interference with operation of the lift by interior or exterior components.

• The lift is designed to carry the weight of a wheelchair and its passenger. The vehicle structure

must be adequate to support all loads produced during lift operation, as well as forces incurred

by the motion of the vehicle during driving.

CAUTIONS

• DO NOT OPERATE THE LIFT ELECTRICALLY OR MANUALLY DURING THE LOAD

TEST. THE LOAD TEST IS DESIGNED TO TEST THE INSTALLATION MOUNTING

OF THE LIFT NOT ITS LIFTING CAPACITY. REMOVE THE TEST WEIGHT IMMEDI-

ATELY AFTER THE TEST.

• WHEN THE TEST WEIGHT IS PLACED ON THE PLATFORM, THE VEHICLE SUS-

PENSION WILL COMPRESS AND THE VEHICLE WILL LEAN. IF THE WEIGHTED

PLATFORM TOUCHES THE GROUND, REMOVE THE WEIGHT, RAISE THE PLAT-

FORM, AND RETEST.

The lift must be test loaded to 125% of its rated 660 pound load capacity to verify the integrity

of the installation. Position the lift platform 2" - 6" above the ground, place 825 pounds in the

center of the platform, and inspect the lift mounting points. REMOVE THE TEST WEIGHT.

• Run the lift through several complete cycles to ensure proper operation.

• Retrieve checklist from documentation kit. Perform the lift checklist inspection per Ricon

document 32SL604.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 76 77

Brak uwag

Eclipse Combustion F8000 Series Service/ Instrukcje Operacyjne Strona 27